Bug Reports
Fixes in Current Product Update
A problem regarding a loss of material reference was solved. The problem presented as giving a (0,0) coordinate centroid and resulted in a failure to analyze. If a section was copied, and material was changed, then the previous material was delete, the error arose.
Small bar movements no longer throws an error.
Printing problems on HP printers have been solved by allowing the user to set the printable margins.
Saving graphics from the project manager cause a lock-up on some computers.
When right clicking on the project name in the project manager UCFyber crashed.
If plotting during analysis in Metric Units on the Capacity Orbits, the plot values were plotting incorrectly.
Capacity Orbits when run under limiting strains with low values were not converging.
Yield Curvatures were not being found when running prestressed concrete section under high axial applied load with user defined materials.
On the capacity orbit. The units where not being converted on the Axial load when looking at the Analysis Report.
When entering in a value that was not a number in the limiting strain option for the Orbit loading case, the program locked up.
Steel percentages were not being read in correctly when viewing a section report that was different that the current section showing on the background screen.
If an error occurred while saving, the previous file was overwritten with the corrupt file.
When canceling a discretization, the input points were being erased.
When getting an error while generating bars, the bar generation point counter was not being reset. The consequence was a left over red line on the section.
Right clicking on the section and selecting 'Show Material' when in metric units caused a program crash.
Closing a material without adding at least one model in the template generator when starting a new project generated an error.
Adding bars outside the boundary as specified by the outer drawing limits caused an error.
To submit a bug report click here. Please attach the file were the problem has been found with an explanation of the problem.
To download the most current product update, visit Product Updates.
If you have any specific question, comments, or concerns, help is available through e-correspondence - contact: Charles Chadwell. Return to the main Support page.
Home | Products | Download | About | Announcements | Support
Webmaster | UC Berkeley Educational Software Archive | General Questions